2014年4月7日星期一
How to Repair Non Stick Pans
Non-stick pans may need repair periodically if they are scratched by metal cooking utensils.Non-stick cooking pans are coated with a Teflon layer so you can cook without worrying about food sticking. They are very convenient but can easily become scratched and damaged when you scrape them with metal spatulas or utensils. Additionally, Teflon flakes that get into your food can pose a health risk. Luckily, you can repair Non Stick Coating non-stick pans so they're as good as new.Other People Are Reading
2014年4月3日星期四
Non-stick pan coatings not worth the risk
June 22, 2009At first the advent of the non-stick (Teflon by trademark) pan coating seemed like a blessing for all who cook. No more scraping, soaking, or worst come to worst, tossing out a hopelessly, burned-beyond-repair skillet or saucepan. Think of the time, effort and frustration saved, not to mention the money when a pan was unsalvageable. The kitchen was getting caught up to 20th-Century technology at last. Was that really such a good thing?
Many of us who are culinarily challenged, destroying food on a regular basis as if we were making burnt-offering sacrifices, quickly discovered that Teflon Coating Teflon wasn't all it was cracked up to be. Despite warnings to avoid scouring and use of metal utensils, it became obvious that these methods were still necessary if something was gooey and defied removal by gentle means. Use of hot water also added to the problem of the coating beginning to flake and peel. Once that began, the pan in question would rapidly become just as difficult to clean as its non-coated competitors. In addition there was the greyish flaking material that ended up in food. Was that something to just cover with sauce and shrug off, and hope your mother-in-law didn't find it?
The material used for the Non Stick Coating non-stick coating, perfluorooctanic acid, or PFOA, has been tested and evalutated by the EPA's Scientific Advisory Board, which considers it a "likely carcinogen." Furthermore, studies by the Center for Science in the Public Interest have been done which found that PFOA causes cancer in lab animals. Additionally, the coating has been linked to serious birth defects such as facial deformities. The chemical ammonium perfluorooctanoate, also called "C8", used in the coating, has been found to cause cancer and internal organ damage among other health problems in lab animals subjected to it. This component of Teflon has been found in the blood samples of numerous Americans, including children. Dupont, the makers of Teflon--which is used not only in cookware but stain-resistant clothing, carpeting, upholstery-- have admitted their product is in the bloodstream of countless people but maintain, despite the evidence, there is nothing to worry about. They haven't convinced those who have borne children with birth defects they claim were caused by the product. Among them are some of Dupont's neighbors in Parkersburg, West Virginia. Serious defects have occurred such as abnormal-sized kidneys, eye and nostril defects in children born to mothers with high blood levels of C8. School-aged children (not only in the plant area) have also been tested and found to have high amounts of the chemical in their blood. Can Dupont responsibly ignore such evidence?
Other adverse effects of Teflon products include deaths of pet birds who inhale fumes given off when non-stick cookware is heated. There is also a reaction known as "Teflon flu", of which Dupont admits knowledge. This occurs when the coating is heated above 500 degrees Ceramic Coating Fahrenheit, resulting in flu-like symptoms as a result of inhalation of the fumes. Again, Dupont representatives do not take this seriously.
In 2003, the ABC news show "20/20" made a documentary on the dangers of Teflon. For the article version of that episode, see:
Many of us who are culinarily challenged, destroying food on a regular basis as if we were making burnt-offering sacrifices, quickly discovered that Teflon Coating Teflon wasn't all it was cracked up to be. Despite warnings to avoid scouring and use of metal utensils, it became obvious that these methods were still necessary if something was gooey and defied removal by gentle means. Use of hot water also added to the problem of the coating beginning to flake and peel. Once that began, the pan in question would rapidly become just as difficult to clean as its non-coated competitors. In addition there was the greyish flaking material that ended up in food. Was that something to just cover with sauce and shrug off, and hope your mother-in-law didn't find it?
The material used for the Non Stick Coating non-stick coating, perfluorooctanic acid, or PFOA, has been tested and evalutated by the EPA's Scientific Advisory Board, which considers it a "likely carcinogen." Furthermore, studies by the Center for Science in the Public Interest have been done which found that PFOA causes cancer in lab animals. Additionally, the coating has been linked to serious birth defects such as facial deformities. The chemical ammonium perfluorooctanoate, also called "C8", used in the coating, has been found to cause cancer and internal organ damage among other health problems in lab animals subjected to it. This component of Teflon has been found in the blood samples of numerous Americans, including children. Dupont, the makers of Teflon--which is used not only in cookware but stain-resistant clothing, carpeting, upholstery-- have admitted their product is in the bloodstream of countless people but maintain, despite the evidence, there is nothing to worry about. They haven't convinced those who have borne children with birth defects they claim were caused by the product. Among them are some of Dupont's neighbors in Parkersburg, West Virginia. Serious defects have occurred such as abnormal-sized kidneys, eye and nostril defects in children born to mothers with high blood levels of C8. School-aged children (not only in the plant area) have also been tested and found to have high amounts of the chemical in their blood. Can Dupont responsibly ignore such evidence?
Other adverse effects of Teflon products include deaths of pet birds who inhale fumes given off when non-stick cookware is heated. There is also a reaction known as "Teflon flu", of which Dupont admits knowledge. This occurs when the coating is heated above 500 degrees Ceramic Coating Fahrenheit, resulting in flu-like symptoms as a result of inhalation of the fumes. Again, Dupont representatives do not take this seriously.
In 2003, the ABC news show "20/20" made a documentary on the dangers of Teflon. For the article version of that episode, see:
What Flooring to Use in a Wet Basement
TweetBasement can prove to be a very functional and useful area in a home for recreational as well as storage purposes. But, there are so many people who cannot use the space in the basement because it remains wet for most of the time. However, there are ways in which the problem of wet basement Ceramic Coating can be overcome and once that is done the finished space can be utilized in myriad ways. Using an appropriate basement flooring option after waterproofing your basement is the correct way of finishing your basement. Normal wood floor is not the solution for basement since water and wood are a bad combination. The floor has to be changed a number of times as it starts rotting if exposed to water for a period of time. Flooring for wet basement is a tough decision to make, if you are not aware of the many flooring options available to you.
Why is Finding a Flooring for Wet Basement So Difficult?
Unless you live in an arid desert, problem of underwater seepage is something that is encountered in most parts of the country. The problem only aggravates in areas of heavy rainfall. The moisture that creeps through basement walls and flooring can play havoc with your basement flooring. It can weaken the adhesive used in floor tiles, thereby leading to heaving and crumpling of tiles. Besides, the problem of mold and mildew which results from moisture can virtually make a basement uninhabitable. So, this is the problem Non Stick Coatings that has to be solved before flooring can be finalized. The simplest way to find if you basement has moisture problem or not is to cover your floor with a sheet of impermeable material by sticking it end to end and keeping it overnight or so. If you find dampness under the sheet, it means that the basement floor has a moisture problem. To solve the problem, the source of the problem has to be found out. It could be anything ranging from standing water to cracks in the foundation. Whatever the source may be, the seeping of moisture has to be stopped first and then the flooring has to be done. Basement waterproofing can take care of most of your problems resulting from water seepage.
Basement Flooring Options
There are various types of flooring options available for wet basements. You can choose any material for your basement flooring that is resistant to moisture. While installing hardwood flooring may not be the wisest idea for basement flooring, you can explore several options in other materials that render the same effect as hardwood flooring. Given below are a few flooring options for basements with water problems.
Engineered Hardwood Floor
This is a potential alternative to normal wooden floors and are constructed in three to five layers of various hardwood materials. This layered structure provides more resistance towards the changes in the humidity and the moisture problems in general.
Laminate Floor
Basically, this kind of flooring is made of wood that is moisture resistant. They also have a backing which helps the flooring to adhere to the sub-floor. On top, there is melamine or aluminum oxide coating which gives it a decorative look and also keeps the floor dry besides preventing it from scratching and staining.
Ceramic Ceramic Coating Floor or Porcelain Tile
These are also a good option if the moisture problem is solved completely and successfully. You can first put an impermeable layer and then a layer of hardwood or cement. Ceramic or porcelain tiles are to be installed on this surface. These tiles are aesthetically good and serve the purpose really well.
More related topic in the links below:
carpet laying auckland
Author's Bio: Graeme Stephens has been running the largest owned carpet cleaning company in new Zealand for 24 years. IICRC qualified "master restoration technician"
Why is Finding a Flooring for Wet Basement So Difficult?
Unless you live in an arid desert, problem of underwater seepage is something that is encountered in most parts of the country. The problem only aggravates in areas of heavy rainfall. The moisture that creeps through basement walls and flooring can play havoc with your basement flooring. It can weaken the adhesive used in floor tiles, thereby leading to heaving and crumpling of tiles. Besides, the problem of mold and mildew which results from moisture can virtually make a basement uninhabitable. So, this is the problem Non Stick Coatings that has to be solved before flooring can be finalized. The simplest way to find if you basement has moisture problem or not is to cover your floor with a sheet of impermeable material by sticking it end to end and keeping it overnight or so. If you find dampness under the sheet, it means that the basement floor has a moisture problem. To solve the problem, the source of the problem has to be found out. It could be anything ranging from standing water to cracks in the foundation. Whatever the source may be, the seeping of moisture has to be stopped first and then the flooring has to be done. Basement waterproofing can take care of most of your problems resulting from water seepage.
Basement Flooring Options
There are various types of flooring options available for wet basements. You can choose any material for your basement flooring that is resistant to moisture. While installing hardwood flooring may not be the wisest idea for basement flooring, you can explore several options in other materials that render the same effect as hardwood flooring. Given below are a few flooring options for basements with water problems.
Engineered Hardwood Floor
This is a potential alternative to normal wooden floors and are constructed in three to five layers of various hardwood materials. This layered structure provides more resistance towards the changes in the humidity and the moisture problems in general.
Laminate Floor
Basically, this kind of flooring is made of wood that is moisture resistant. They also have a backing which helps the flooring to adhere to the sub-floor. On top, there is melamine or aluminum oxide coating which gives it a decorative look and also keeps the floor dry besides preventing it from scratching and staining.
Ceramic Ceramic Coating Floor or Porcelain Tile
These are also a good option if the moisture problem is solved completely and successfully. You can first put an impermeable layer and then a layer of hardwood or cement. Ceramic or porcelain tiles are to be installed on this surface. These tiles are aesthetically good and serve the purpose really well.
More related topic in the links below:
carpet laying auckland
Author's Bio: Graeme Stephens has been running the largest owned carpet cleaning company in new Zealand for 24 years. IICRC qualified "master restoration technician"
The First Day of Life
En EspañolTeachers - Looking for Health Lessons? Visit KidsHealth in the ClassroomWhat Other Parents Are ReadingQ&A: ObamacareFinding Affordable Health CareEating Well & Staying FitFlu Vaccine: How Many Doses?Connect With Us: Social MediaPregnant? Your Baby's Growth
The First Day of LifeKidsHealth>Parents>Pregnancy & Newborn Center>Childbirth>The First Day of LifePrintAAA
Text SizeWhat's in this article? (click to view)What Your Newborn Looks LikeNewborn TestsWhat Your Baby Does on the First DayBreastfeeding or Bottle-feedingYour FeelingsFriends and FamilyIf There's a Problem
You've been waiting for this day for months: Finally you get to meet your new baby. But like many new parents, you might not have a clear idea of what that meeting will be like.
Wondering how your baby will look and what he or she will do after arriving? Read on.
What Your Newborn Looks LikeAlthough Ceramic Coating you may have visions of a robust bouncing baby, reality may not match that image. Many newborns are tiny, wet creatures when they first emerge. Often their heads are slightly pointed as a result of passing through the birth canal. This is only temporary — the head will take on a rounded appearance within a few days. It may surprise you that a newborn's head is so big compared with the rest of the body.
Your baby also may look scrunched up since the legs and arms have been kept bent at the knees and elbows while in the womb. After months of growing in ever-tightening close quarters, this is perfectly normal. The limbs will straighten out as your baby grows.
Look at your baby's tiny fingers and toes. You'll notice the paper-thin — and sometimes long — nails.
Your baby's skin may have one of several possible appearances, looking somewhat red, pink, or purple at first. Some babies are born with a white coating called vernix caseosa, which protects their skin from the constant exposure to amniotic fluid in the womb. The vernix is washed off with the baby's first bath. Other babies are born very wrinkled. And some, especially Non Stick Coating premature babies, have a soft, furry appearance because of lanugo, a fine hair that develops while in the womb. Lanugo usually comes off after a week or two.
Rashes, blotches, or tiny white spots also are common on newborns. These generally clear up over the first few days or weeks after birth. The doctor will examine your baby within the first 12-24 hours of birth and make sure that any rashes or spots are normal.
Remember, your baby's appearance will change dramatically over the next weeks as he or she grows. The limbs will extend, the skin tone will probably change, and the blotches will disappear.
Continue
Newborn TestsImmediately after birth, your baby will be evaluated through an Apgar scoreto determine his or her state of health. This routine test measures a baby's responsiveness and vital signs. Five factors are checked: heart rate, breathing, color, activity and muscle tone, and grimace reflex response.
The baby is given a score of 0-2 in each category, and the five numerical results are added together. This total is called the Apgar score. The evaluation is done again at 1 minute and again at 5 minutes. This quick and easy test is given mainly to see if the baby needs help breathing. A score of 7-10 is generally considered normal, and if your baby receives this score, no special actions usually need to be taken at that time. A lower score means some extra measures, such as giving the baby oxygen, may be needed initially.
Your newborn will go through a few other quick procedures, which may include:
clearing the nasal passages with a suction bulbweight, head circumference, and length measuredeye ointment or drops given to prevent infectionThe medical staff Teflon Coating will dry your baby and place a blanket around him or her. All of this happens very quickly, and before you know it your baby is in your arms for some special bonding time. After a first breastfeeding attempt, it's time for a few more procedures, usually after about 10-30 minutes.
While the mother rests in either the birthing or recovery room, the baby is taken to the nursery to receive a thorough bath. Usually the father is allowed to come along. Your baby will be given vitamin K, by injection, to help the blood clot properly. Your baby may also receive a dose of hepatitis B vaccine, with your consent.
Other tests vary from one hospital to another. Your newborn may be given a blood test to check blood sugar levels. If the level is too low or other problems are discovered, the baby may require immediate medical attention.
Also, a newborn screeningblood test will be drawn before the baby leaves the hospital to look for PKU (phenylketonuria), congenital hypothyroidism, and other diseases that need to be diagnosed early in infancy to ensure successful treatment. It is recommended that all babies have a hearing screen before leaving the hospital so possible problems can be picked up early on.
With a vaginal birth, the average newborn stay is about 48 hours. With a cesarean delivery, it is about 96 hours.
BackContinue
What Your Baby Does on the First DayMany parents are surprised to see how alert a newborn really is. Right after birth, a newborn's eyes are open quite a bit and babies spend a lot of time studying faces — especially their parents'. Your baby may turn or react to the sound of your voices. Your baby is using all of the senses, including smell and touch, to further identify and become attached to you.
Your newborn will cry, sleep, and at times will look directly into your eyes. Although the vision is blurry, your baby can best see something (such as your face) that is about 8 to 15 inches away. Your baby will grab onto your finger if you place it in his or her palm. And of course, your baby will want to eat.
After initially being very awake, most newborns get sleepy for about the next 24 hours. It's important to wake them to feed every 2 to 3 hours so they get used to the process and start to get something to eat. If a mother is breastfeeding, this is also the best way to encourage milk to come in.
Breastfeeding or Bottle-feedingIf a mother has decided to breastfeed, she can begin as soon as her newborn is placed in her arms. Although your milk probably won't fully come in for another day or two, especially with first-time mothers, the baby does receive nourishment from your colostrum, a precursor to actual breast milk. For some women colostrum is thin and watery; for others it is thick and yellowish. As your baby sucks on your breast, this action triggers hormones to tell your body that it's time to produce milk. These first feedings are great practice runs for both mom and baby.
Some babies (especially premature and smaller babies) have a hard time latching on or getting enough suction to nurse from your breast. A nurse, breastfeeding counselor, or lactation consultant can help you and your baby overcome any hurdles. Even if breastfeeding is going smoothly from the start, it's still helpful to learn as much about it as you can from a breastfeeding specialist.
Initially, you will probably be feeding your baby about every 2 to 3 hours around the clock. If you will be bottle-feedingyour baby, you can usually begin within the first few hours of life.
BackContinue
Your FeelingsHaving a baby is a major, life-changing experience. Don't be surprised to find that you go through a broad range of feelings. You may experience everything from elation to concern to anxiety to unrestrained joy. And your feelings may change suddenly and unpredictably. In addition, the mother has just been through quite a bit physically. There's a good chance she'll be exhausted, and both parents may start feeling the effects of sleep deprivation.
Every parent reacts differently. Some mothers "forget" the difficulties of labor as soon as they catch a glimpse of their newborns. Some feel high levels of energy driven by the excitement of finally having the baby. Still others feel sad and may experience baby blues or the more serious postpartum depression.
A physician, nurse, or counselor can help parents understand their emotions after the baby arrives.
Friends and FamilyAlthough you want to share your good news with the world, a good rule of thumb is to keep the first day simple. Make calls to close friends and family members, and ask them to pass the news along to other friends and relatives. Having a network of callers will free you to spend more time with your newborn.
It's fine to have your loved ones meet the baby the first day. Grandparents or siblings can meet the newest family member and start to bond right away. But avoid a parade of visitors in and out of the room to keep the baby's first day tranquil and low-key. Parents and baby need plenty of rest and quiet bonding time.
It's also wise to limit visitors in the first few weeks because of the possibility of exposing your baby to infection. Whenever visitors come, make sure they are not sick, and have everyone wash their hands before touching the baby.
If There's a ProblemIf your baby is born with a problemor arrives prematurely, this can be a difficult time. The hospital's medical team is trained to offer professional recommendations and discuss options. If you're not up to talking with a doctor yet, don't be afraid to ask your partner or another close relative to do so. The medical staff will be sensitive to your needs.
For many parents, talking with a counselor or clergy member brings some comfort. Many support groups are available to give you the emotional backing you'll need. Don't hesitate to ask for help.
When your baby is born, you'll enter an entirely new phase of your life. Take the time during your baby's first days to savor this new beginning.
Reviewed by: Elana Pearl Ben-Joseph, MD
Date reviewed: November 2011
Back1• 2• 3• 4For TeensFor KidsFor ParentsMORE ON THIS TOPICPregnancy & Newborn CenterRecovering From DeliveryBonding With Your BabyLooking at Your Newborn: What's NormalA Guide for First-Time ParentsMedical Care and Your NewbornFeeding Your NewbornContact UsPrintAdditional resourcesSend to a friendReprint guidelinesBookmark this pageShare this page using:What are these?
Note: Clicking these links will take you to a site outside of KidsHealth's control.
Sign up for our free weekly eNewsletters here
About KidsHealthAbout NemoursContact UsPartnersEditorial PolicyPrivacy Policy & Terms of UseVisit the Nemours Web site.Note: All information on KidsHealth® is for educational purposes only. For specific medical advice, diagnoses, and treatment, consult your doctor.
© 1995- The Nemours Foundation. All rights reserved.
The First Day of LifeKidsHealth>Parents>Pregnancy & Newborn Center>Childbirth>The First Day of LifePrintAAA
Text SizeWhat's in this article? (click to view)What Your Newborn Looks LikeNewborn TestsWhat Your Baby Does on the First DayBreastfeeding or Bottle-feedingYour FeelingsFriends and FamilyIf There's a Problem
You've been waiting for this day for months: Finally you get to meet your new baby. But like many new parents, you might not have a clear idea of what that meeting will be like.
Wondering how your baby will look and what he or she will do after arriving? Read on.
What Your Newborn Looks LikeAlthough Ceramic Coating you may have visions of a robust bouncing baby, reality may not match that image. Many newborns are tiny, wet creatures when they first emerge. Often their heads are slightly pointed as a result of passing through the birth canal. This is only temporary — the head will take on a rounded appearance within a few days. It may surprise you that a newborn's head is so big compared with the rest of the body.
Your baby also may look scrunched up since the legs and arms have been kept bent at the knees and elbows while in the womb. After months of growing in ever-tightening close quarters, this is perfectly normal. The limbs will straighten out as your baby grows.
Look at your baby's tiny fingers and toes. You'll notice the paper-thin — and sometimes long — nails.
Your baby's skin may have one of several possible appearances, looking somewhat red, pink, or purple at first. Some babies are born with a white coating called vernix caseosa, which protects their skin from the constant exposure to amniotic fluid in the womb. The vernix is washed off with the baby's first bath. Other babies are born very wrinkled. And some, especially Non Stick Coating premature babies, have a soft, furry appearance because of lanugo, a fine hair that develops while in the womb. Lanugo usually comes off after a week or two.
Rashes, blotches, or tiny white spots also are common on newborns. These generally clear up over the first few days or weeks after birth. The doctor will examine your baby within the first 12-24 hours of birth and make sure that any rashes or spots are normal.
Remember, your baby's appearance will change dramatically over the next weeks as he or she grows. The limbs will extend, the skin tone will probably change, and the blotches will disappear.
Continue
Newborn TestsImmediately after birth, your baby will be evaluated through an Apgar scoreto determine his or her state of health. This routine test measures a baby's responsiveness and vital signs. Five factors are checked: heart rate, breathing, color, activity and muscle tone, and grimace reflex response.
The baby is given a score of 0-2 in each category, and the five numerical results are added together. This total is called the Apgar score. The evaluation is done again at 1 minute and again at 5 minutes. This quick and easy test is given mainly to see if the baby needs help breathing. A score of 7-10 is generally considered normal, and if your baby receives this score, no special actions usually need to be taken at that time. A lower score means some extra measures, such as giving the baby oxygen, may be needed initially.
Your newborn will go through a few other quick procedures, which may include:
clearing the nasal passages with a suction bulbweight, head circumference, and length measuredeye ointment or drops given to prevent infectionThe medical staff Teflon Coating will dry your baby and place a blanket around him or her. All of this happens very quickly, and before you know it your baby is in your arms for some special bonding time. After a first breastfeeding attempt, it's time for a few more procedures, usually after about 10-30 minutes.
While the mother rests in either the birthing or recovery room, the baby is taken to the nursery to receive a thorough bath. Usually the father is allowed to come along. Your baby will be given vitamin K, by injection, to help the blood clot properly. Your baby may also receive a dose of hepatitis B vaccine, with your consent.
Other tests vary from one hospital to another. Your newborn may be given a blood test to check blood sugar levels. If the level is too low or other problems are discovered, the baby may require immediate medical attention.
Also, a newborn screeningblood test will be drawn before the baby leaves the hospital to look for PKU (phenylketonuria), congenital hypothyroidism, and other diseases that need to be diagnosed early in infancy to ensure successful treatment. It is recommended that all babies have a hearing screen before leaving the hospital so possible problems can be picked up early on.
With a vaginal birth, the average newborn stay is about 48 hours. With a cesarean delivery, it is about 96 hours.
BackContinue
What Your Baby Does on the First DayMany parents are surprised to see how alert a newborn really is. Right after birth, a newborn's eyes are open quite a bit and babies spend a lot of time studying faces — especially their parents'. Your baby may turn or react to the sound of your voices. Your baby is using all of the senses, including smell and touch, to further identify and become attached to you.
Your newborn will cry, sleep, and at times will look directly into your eyes. Although the vision is blurry, your baby can best see something (such as your face) that is about 8 to 15 inches away. Your baby will grab onto your finger if you place it in his or her palm. And of course, your baby will want to eat.
After initially being very awake, most newborns get sleepy for about the next 24 hours. It's important to wake them to feed every 2 to 3 hours so they get used to the process and start to get something to eat. If a mother is breastfeeding, this is also the best way to encourage milk to come in.
Breastfeeding or Bottle-feedingIf a mother has decided to breastfeed, she can begin as soon as her newborn is placed in her arms. Although your milk probably won't fully come in for another day or two, especially with first-time mothers, the baby does receive nourishment from your colostrum, a precursor to actual breast milk. For some women colostrum is thin and watery; for others it is thick and yellowish. As your baby sucks on your breast, this action triggers hormones to tell your body that it's time to produce milk. These first feedings are great practice runs for both mom and baby.
Some babies (especially premature and smaller babies) have a hard time latching on or getting enough suction to nurse from your breast. A nurse, breastfeeding counselor, or lactation consultant can help you and your baby overcome any hurdles. Even if breastfeeding is going smoothly from the start, it's still helpful to learn as much about it as you can from a breastfeeding specialist.
Initially, you will probably be feeding your baby about every 2 to 3 hours around the clock. If you will be bottle-feedingyour baby, you can usually begin within the first few hours of life.
BackContinue
Your FeelingsHaving a baby is a major, life-changing experience. Don't be surprised to find that you go through a broad range of feelings. You may experience everything from elation to concern to anxiety to unrestrained joy. And your feelings may change suddenly and unpredictably. In addition, the mother has just been through quite a bit physically. There's a good chance she'll be exhausted, and both parents may start feeling the effects of sleep deprivation.
Every parent reacts differently. Some mothers "forget" the difficulties of labor as soon as they catch a glimpse of their newborns. Some feel high levels of energy driven by the excitement of finally having the baby. Still others feel sad and may experience baby blues or the more serious postpartum depression.
A physician, nurse, or counselor can help parents understand their emotions after the baby arrives.
Friends and FamilyAlthough you want to share your good news with the world, a good rule of thumb is to keep the first day simple. Make calls to close friends and family members, and ask them to pass the news along to other friends and relatives. Having a network of callers will free you to spend more time with your newborn.
It's fine to have your loved ones meet the baby the first day. Grandparents or siblings can meet the newest family member and start to bond right away. But avoid a parade of visitors in and out of the room to keep the baby's first day tranquil and low-key. Parents and baby need plenty of rest and quiet bonding time.
It's also wise to limit visitors in the first few weeks because of the possibility of exposing your baby to infection. Whenever visitors come, make sure they are not sick, and have everyone wash their hands before touching the baby.
If There's a ProblemIf your baby is born with a problemor arrives prematurely, this can be a difficult time. The hospital's medical team is trained to offer professional recommendations and discuss options. If you're not up to talking with a doctor yet, don't be afraid to ask your partner or another close relative to do so. The medical staff will be sensitive to your needs.
For many parents, talking with a counselor or clergy member brings some comfort. Many support groups are available to give you the emotional backing you'll need. Don't hesitate to ask for help.
When your baby is born, you'll enter an entirely new phase of your life. Take the time during your baby's first days to savor this new beginning.
Reviewed by: Elana Pearl Ben-Joseph, MD
Date reviewed: November 2011
Back1• 2• 3• 4For TeensFor KidsFor ParentsMORE ON THIS TOPICPregnancy & Newborn CenterRecovering From DeliveryBonding With Your BabyLooking at Your Newborn: What's NormalA Guide for First-Time ParentsMedical Care and Your NewbornFeeding Your NewbornContact UsPrintAdditional resourcesSend to a friendReprint guidelinesBookmark this pageShare this page using:What are these?
Note: Clicking these links will take you to a site outside of KidsHealth's control.
Sign up for our free weekly eNewsletters here
About KidsHealthAbout NemoursContact UsPartnersEditorial PolicyPrivacy Policy & Terms of UseVisit the Nemours Web site.Note: All information on KidsHealth® is for educational purposes only. For specific medical advice, diagnoses, and treatment, consult your doctor.
© 1995- The Nemours Foundation. All rights reserved.
Star Wars Pancake Molds - Product Review - Williams Sonoma's Star Wars Pancake Molds
See More Aboutstar warsstar wars pancakesstar wars pancake moldsstar wars productsstar wars foodWilliams Sonoma's Star Wars pancake molds make adorable pancakes in the shape of Ceramic Coating Paint Star Wars characters. They get less adorable, however, when you realize how tricky the molds are to use.
Description Set of three pancake molds and a cloth storage pouch. Star Wars heroes and villains: Yoda, Darth Vader, and a Stormtrooper. 4 1/2" to 7 3/4" wide. Non-stick steel. Fold-down handles. Hand-wash only. Pros Make really cute pancakes. Handles fold down for easy storage. Cons Non-stick coating still sticks. Handles overheat. Yoda pancake mold is overly wide. ReviewStar Wars pancake molds of Yoda, Darth Vader, and a Stormtrooper.
Williams SonomaWhen I finally got these Star Wars Non Stick Coating pancake molds to work, I was very happy with the results. My best pancakes had almost the same golden-brown shade and neat edges as the product's promotional photos. And really, what Star Wars fan doesn't want to eat Darth Vader's face?
My first dozen or so attempts, however, were a disaster. The major problem with these pancake molds is that they aren't really non-stick. The directions say to spray them with non-stick cooking spray before use, but even with this help the pancakes were nearly impossible to remove from the mold.
A liberal coating of canola oil and gentle application of a butter knife helped, but whether or not the pancake came out of the mold nicely or tore in half seemed mostly up to chance. In addition, after a few uses the molds became difficult to remove because the metal handles got too hot to touch without a potholder.
The Yoda pancake mold posed another Teflon Coatings problem: at 7 3/4 inches wide, it was just too big for my largest frying pan. It shouldn't be a problem on a large griddle, but the size of the molds is something to keep in mind before you buy them.
I love the idea of these pancake molds, and I really like how the pancakes eventually turned out. Good pancakes should be simple, however, and these molds are way too much of a hassle for all but the most special of occasions.
Disclosure: Review samples were provided by the manufacturer. For more information, please see our Ethics Policy.
Description Set of three pancake molds and a cloth storage pouch. Star Wars heroes and villains: Yoda, Darth Vader, and a Stormtrooper. 4 1/2" to 7 3/4" wide. Non-stick steel. Fold-down handles. Hand-wash only. Pros Make really cute pancakes. Handles fold down for easy storage. Cons Non-stick coating still sticks. Handles overheat. Yoda pancake mold is overly wide. ReviewStar Wars pancake molds of Yoda, Darth Vader, and a Stormtrooper.
Williams SonomaWhen I finally got these Star Wars Non Stick Coating pancake molds to work, I was very happy with the results. My best pancakes had almost the same golden-brown shade and neat edges as the product's promotional photos. And really, what Star Wars fan doesn't want to eat Darth Vader's face?
My first dozen or so attempts, however, were a disaster. The major problem with these pancake molds is that they aren't really non-stick. The directions say to spray them with non-stick cooking spray before use, but even with this help the pancakes were nearly impossible to remove from the mold.
A liberal coating of canola oil and gentle application of a butter knife helped, but whether or not the pancake came out of the mold nicely or tore in half seemed mostly up to chance. In addition, after a few uses the molds became difficult to remove because the metal handles got too hot to touch without a potholder.
The Yoda pancake mold posed another Teflon Coatings problem: at 7 3/4 inches wide, it was just too big for my largest frying pan. It shouldn't be a problem on a large griddle, but the size of the molds is something to keep in mind before you buy them.
I love the idea of these pancake molds, and I really like how the pancakes eventually turned out. Good pancakes should be simple, however, and these molds are way too much of a hassle for all but the most special of occasions.
Disclosure: Review samples were provided by the manufacturer. For more information, please see our Ethics Policy.
How to Make Beef Cubed Steaks More Tender
Photo Caption How to Make Beef Cubed Steaks More TenderPhoto Credit Victor Holguin/Demand MediaHow to make a tough cut of beef more palatable is an age-old culinary conundrum. Round, chuck and other tough steaks are often tenderized via pounding with a mallet or cubing machine. Teflon Coatings Pounding the meat into a thin cutlet tenderizes it and leaves square imprints on the surface -- hence the name "cube steak." If you want to make your cube steak even more tender, a few key marinade ingredients can do the trick, as can preparing it with a slow, wet cooking method like braising. These options aren't complicated, but they do extend your prep or cooking time.
Step 1Submerse the cube steak in milk, buttermilk or yogurt in a Non Stick Coatings non-reactive dish for up to four hours, turning it once halfway through. These dairy ingredients have tenderizing enzymes while being relatively low in acids that break down muscle fibers and can make your meat mushy. Cover the dish and keep it in the refrigerator.
Step 1Submerse the cube steak in milk, buttermilk or yogurt in a Non Stick Coatings non-reactive dish for up to four hours, turning it once halfway through. These dairy ingredients have tenderizing enzymes while being relatively low in acids that break down muscle fibers and can make your meat mushy. Cover the dish and keep it in the refrigerator.
2014年3月26日星期三
How Do You Lubricate A Treadmill Belt
Photo Caption Keep your treadmill running with a regular lube job.Photo Credit Jupiterimages/Goodshoot/Getty ImagesLubricating your treadmill belt every six months or 150 miles can keep vital treadmill parts -- including the deck, belt, motor and motor controller -- from prematurely Ceramic Coating wearing out. It can also help your treadmill run more quietly and reduce friction between the belt and the treadmill deck. Lubricating your treadmill takes just minutes to complete and is relatively inexpensive.
Step 1Turn your treadmill off and unplug the power cord from the wall outlet. Use a screwdriver to loosen the screws on each side of the machine.
Step 2Gently lift each side of the treadmill belt so you can see the treadmill deck's surface and you can peek through to the other side easily.
Step 3Spray or squirt lubricant along the sides of the Non Stick Coating treadmill deck, taking care not to drip any on the floor. Wipe up any excess lubricant with a rag. For best results, apply rubbing alcohol to your cleaning rag or sponge. This will more effectively absorb any excess lubricant.
Step 1Turn your treadmill off and unplug the power cord from the wall outlet. Use a screwdriver to loosen the screws on each side of the machine.
Step 2Gently lift each side of the treadmill belt so you can see the treadmill deck's surface and you can peek through to the other side easily.
Step 3Spray or squirt lubricant along the sides of the Non Stick Coating treadmill deck, taking care not to drip any on the floor. Wipe up any excess lubricant with a rag. For best results, apply rubbing alcohol to your cleaning rag or sponge. This will more effectively absorb any excess lubricant.
订阅：
博文 (Atom)